What do you get from this? Much: rapid acceleration, overtaking confident, increase the maximum speed, more comfortable driving in urban settings and, finally, just a great pleasure of driving. Chip-tuning - is the most progressive way to improve the dynamics of the movement of your car. It is achieved by changing the settings controller engine management system. Changing provide special programs, which provide different conditions of engine operation, as well as the electronic systems installed in the car. It should be noted that these parameters are monitored by various sensors and, depending on their testimony, the engine uses a variety of settings (the strategy), ensuring a certain mode of engine operation. Universal program, established by the manufacturer on production vehicles took into account a very large range of deviations from optimal values, where the engine is still working, such as: the poor quality of fuel, worn spark plugs, margin of overheating (the maximum at high temperatures), contaminated injectors and etc. It is understandable that owners who use the car very intensively in different circumstances and with his service, when it will turn out, this program has some margin of safety - a large but not infinite. Therefore, for this category of owners - this program is truly the best. However, if you are attentive to their car, regularly provides services to the dealer stations (using only original materials and spare parts), zapravlyaete it (if possible), high-quality fuel and support the work of all systems in good condition, then you certainly can count on that and the car will be able to answer your concern about it. Therefore, chip-tuning really to you!
The general principle of chip-tuning is to improve the individual characteristics of the engine, namely: cost, toxicity, dynamic characteristics - the engine power and torque. Let only the basic, most in demand - dynamic. (Please note that the change management program - a very complicated process. The program should conform to many criteria, therefore, of paramount importance technical facilities and equipment tuning company, the qualifications of its engineering staff, as well as all the necessary requirement for identification a dealer of equipment only highly qualified individuals).
The program increases the power and torque developed by order of a particular car. This takes into account everything: equipment, mileage, engine wear, the type of gearbox, the exploitation of the region, even temperature zone. The upgraded program provides a high-impact power and torque in all modes of motion as compared to the universal. Typically, such programs are produced and are optimized for a higher quality of A98 gasoline (premium) for cars with mileage to 100,000 km, taking into account the small engine wear. In advancing, only the possibility of electronic control systems, without interference in the design of the engine and no additional changes are made. In principle, under the circumstances, this can not lead to increased engine wear, if you adhere to these requirements.
A reasonable question: How so? If the engine has become more powerful, and then wear it should be higher than the baseline? But it turns out that this is true only when the engine forcing itself, that is, if we are changing the design of the engine. In our case, we produce only the optimization of the engine load and to ensure a better quality of fuel combustion with a high octane, improve the efficiency of the ignition system and fuel injection. This basic rule is implemented quality chip tuning - the most complete combustion of fuel-air mixture during all modes of engine operation. This provides an additional increase in power and torque.
What do you get from this? Much: rapid acceleration, overtaking confident, increase the maximum speed, more comfortable driving in urban settings and, finally, just a great pleasure of driving.
